manualshive.com logo in svg

Broadcom Brocade X7-4 Director, Руководство по установке оборудования

Поделиться
Скачать
Broadcom Brocade X7-4 Director Скачать руководство пользователя страница 98

X7-4-Install-IG100 Installation Guide

 

Brocade

®

 X7-4 Director Hardware Installation Guide

Figure 46: WWN Card LEDs on Bezel

1. Power LED for WWN Card 1

2. Status LED for WWN Card 1

3. Power LED for WWN Card 2

4. Status LED for WWN Card 2

Table 24: WWN Card LED Descriptions

LED Purpose

Color

Status

Recommended Action

No light (LED is off)

The card is not receiving power. Ensure that device power

supplies are firmly seated,

power cables are connected,

and cables are connected to a

power source.

Power

Steady green

The card is receiving power.

No action required.

No light (LED is off)

The card is either healthy or

does not have power.

No action required.

Status

Steady amber

The card is faulty.

Replace card.

Interpreting Power Supply LEDs

See the following information to interpret the LED patterns on the power supply. The LED patterns may temporarily

change during POST and other diagnostic tests. The Brocade X7-4 Director has two power supplies.

Figure 47: AC Power Supply LED

1. Power Status LED

 

X7-4-Install-IG100

98

Broadcom

Содержание Brocade X7-4 Director
























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды