Completing the Setup: Broadcom BCM94301MPL Mini PCI Card User's Guide
Back to Contents
Completing the Setup: Broadcom BCM9430
1
MP
L
Mini PCI Card User's
Guide
NOTE—Before you begin, be sure you have the required network information from your network administrator (see
Before you begin
in
the
Introduction
section).
Configuring a network profile (Windows® 2000 environment)
Configuring a network profile (Windows® XP environment)
Configuring a network profile (Windows® 2000 environment)
Before you can connect to a wireless network, you must configure a network profile for that network on your computer using the
BCM9430
1
MP
L
wireless utility. If you purchased your portable computer with the Broadcom BCM9430
1
MP
L
internal 802.11b Mini PCI
card already installed and set up at the factory, follow the network profile configuration instructions provided below. If this is not the
case, first verify that the Broadcom BCM9430
1
MP
L
card has been properly installed in your computer according to the installation
instructions. Then proceed with the following instructions for configuring your network profiles. The instructions explain how to open the
utility and how to use it to configure a network profile.
Opening the utility
1. From the desktop, click the
Start
button, point to
Settings
, and click
Control Panel
.
2. Double-click the
BCM9430
1
MP
L
Wireless Utility
icon
.
3. If the
Wireless Networks
tab in the
Wireless Configuration
box is not on top, click the
Wireless Networks
tab.
file:///P|/pc/My%20Documents/Working/User%20Guides/94306MP/setup.htm (1 of 25) [11/22/2002 2:16:07 PM]