Broadcom ASG-S200, Быстрый старт

Страница: 4 / 6

ASG - S200, ASG - S400, ASG - S500
4
Advanced Secure Gateway
Quick Start Guide
4. Activate any add-on licenses that were purchased:

Go to support.broadcom.com/security and click My
Entitlements . When prompted, enter the admin
Username and Password .

Search for the appliance you want to license by enter -
ing its Serial Number , Site ID , or Email .

When the appliance appears, click the License
Download icon.

Repeat the previous steps to install any additional add-
on licenses.
5. If any add-on licenses were installed, download and in -
stall the updated base license:

In the Management Console window, navigate to the
Proxy > Maintenance > Licensing > Install tab.

Click Retrieve . The appliance downloads the updated
base license from the licensing server and installs it.
6. Activate and view the installed licenses and services:

In the Management Console window, navigate to the
Content Analysis > System > Licensing tab.

Each licensable service shows the following:
–
Status: The availability of a service component and
its expiration date.
– Active: The activation status of the component.

To activate a service component, click its checkbox.

Click Save Changes .
6 — Perform a Graceful Shutdown
Before mounting the appliance, log in to CLI and perform a
graceful shutdown of the appliance.
To perform a graceful shutdown:
1. Open a terminal emulation program and log in to the
appliance.
NOTE: Confirm the appliance’s DB9 Serial port is con -
nected to a serial terminal or workstation and that the ter -
minal emulation software is configured as in Perform the
Initial Configuration .
2. When prompted with the Serial Console welcome
screen, to access CLI, press:
1
3. To access privileged commands, enter: enable
4. When prompted, enter the enable Password specified
during the initial configuration.
5. Enter:
shutdown
WARNING! Do not power off the appliance with the soft pow -
er switch or by removing the power cables! Abruptly removing
power can result in irreparable data loss. Always use the
shutdown command from CLI to power off the appliance.
7 — Mount the Appliance
The slide-rail kit included with ASG - S400 and ASG - S500 ap -
pliances (available as an option for ASG - S200 appliances)
allows the appliance to be mounted in a 4- or 2-post equip -
ment rack. The slide-rail kit includes the following parts:
NOTE: Installation of the slide rails requires an M4 nut driver
or adjustable wrench and a #2 Phillips head screwdriver. If
you are working alone, a mechanical lift is also required.
NOTE: The following procedure documents installation for 4-
post equipment racks (as shown in Figure 2 ). For 2-post instal -
lation, see the
S-Series WebGuide
, available at:
techdocs.broadcom.com/sseries
Item
(2) Front brackets
(2) Inner rails
(2) Rear brackets
(2) Center brackets
(2) Rack ears
(8) M6x13 screws
(8) M6 cage nuts
(10) M4x4L screws
(4) M3L4 screws
ASG-S200 (Optional) and ASG-S400 Rail Kit
Item
(2) Front brackets
(2) Inner rails
(2) Rear brackets
(4) Middle brackets
(8) M6x13 screws
(8) M6 cage nuts
(10) M4x5L screws
(4) M4x4L screws
ASG-S500 Rail Kit