11
SapphireTX Camera Back User Manual
Using the SapphireTX in a System
Transmissions from the SapphireTX can be received on the BWS Sapphire-RXD receiver decoder. The
system should be connected as shown below. The SapphireTX and Sappire-RXD should be
positioned at least 20m apart during configuration to prevent the transmitted signals overloading
the receiver.
Critical Connections on the SapphireTX
1)
The SapphireTX will need to be powered, this can be by connecting a battery such as a V-
Lock or Anton Bauer (model dependant) to the SapphireTX battery plate, or by connecting
the power in connector to a suitable power source (6-18V).
2)
The camera video output should be connected to the SapphireTX video inputs, see previous
section for notes on 3G, 6G and 12G connection
