Broadcast 6000 Скачать руководство пользователя страница 15

6000 Broadcast Audio Delay

User’s Guide

PAGE 11

The AirTools™ Limited Warranty

Symetrix, Inc. expressly warrants that AirTools™ products will be free from defects in material and workman-

ship for eighteen (18) months from the date the product is shipped from the factory. Symetrix's obligations under 

this warranty will be limited to repairing or replacing, at Symetrix's option, the part or parts of the product which 

prove defective in material or workmanship within eighteen (18) months from the date the product is shipped from 

the factory, provided that the Buyer gives Symetrix prompt notice of any defect or failure and satisfactory proof 

thereof. Products may be returned by Buyer only after a Return Authorization number (RA) has been obtained 

from Symetrix. Buyer will prepay all freight charges to return the product to the Symetrix factory. Symetrix 

reserves the right to inspect any products which may be the subject of any warranty claim before repair or 

replacement is carried out. Symetrix may, at its option, require proof of the original date of purchase (dated copy 

of original retail dealer's invoice). Final determination of warranty coverage lies solely with Symetrix. Products 

repaired under warranty will be returned freight prepaid via United Parcel Service by Symetrix, to any location 

within the Continental United States. Outside the Continental United States, products will be returned freight col-

lect.

The foregoing warranties are in lieu of all other warranties, whether oral, written, express, implied or 
statutory. Symetrix, Inc. expressly disclaims any IMPLIED warranties, including fitness for a particular 
purpose or merchantability. Symetrix's warranty obligation and buyer's remedies hereunder are SOLELY 
and exclusively as stated herein.

This Symetrix product is designed and manufactured for use in professional and studio audio systems and is not 

intended for other usage. With respect to products purchased by consumers for personal, family, or household 

use, 

Symetrix expressly disclaims all implied warranties, including but not limited to warranties of mer-

chantability and fitness for a particular purpose.

This limited warranty, with all terms, conditions and disclaimers set forth herein, shall extend to the original pur-

chaser and anyone who purchases the product within the specified warranty period.
Warranty Registration must be completed and mailed to Symetrix within thirty (30) days of the date of purchase.
Symetrix does not authorize any third party, including any dealer or sales representative, to assume any liability or 

make any additional warranties or representation regarding this product information on behalf of Symetrix.
This limited warranty gives the buyer certain rights. You may have additional rights provided by applicable law.
NOTE: Some AirTools™ products contain embedded software and may also be accompanied by control software 

intended to be run on a personal computer. Said software is specifically excluded from this warranty.

Limitation of Liability

The total liability of Symetrix on any claim, whether in contract, tort (including negligence) or otherwise arising 

out of, connected with, or resulting from the manufacture, sale, delivery, resale, repair, replacement or use of any 

product will not exceed the price allocatable to the product or any part thereof which gives rise to the claim. In no 

event will Symetrix be liable for any incidental or consequential damages including but not limited to damage for 

loss of revenue, cost of capital, claims of customers for service interruptions or failure to supply, and costs and 

expenses incurred in connection with labor, overhead, transportation, installation or removal of products, substi-

tute facilities or supply houses.

6

Warranty and Service

Содержание 6000























Отзывы: