e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
Telco Sentinel Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a BROADCAST TOOLS® TELCO SEN-
TINEL, bi-directional USB DTMF/ASCII transceiver with built-in hybrid (referred
to as the TELCO SENTINEL throughout this manual). We’re confident that this
product will give you many years of dependable service. This manual is intended
to give you all the information needed to install and operate the BROADCAST
TOOLS® TELCO SENTINEL.
SAFETY INFORMATION
Only qualified technical personnel should install the TELCO SENTINEL.
Any attempt to install this device by a person who is not technically qualified could
result in a hazardous condition to the installer or other personnel or damage to the
TELCO SENTINEL or other equipment. Please ensure that proper safety precau-
tions have been taken before installing this device. If you are unfamiliar with this
type of equipment, please contact a properly qualified engineer to handle the instal-
lation and setup of the TELCO SENTINEL. Broadcast Tools, Inc., is unable to sup-
port NON-Broadcast Tools software, hardware or NON-Broadcast Tools comput-
er/hardware/software problems. If you experience these problems, please research
your hardware/software instruction manuals or contact the manufacturers technical
support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance,
please contact your distributor from whom you purchased this equipment.
If you would like more information about Broadcast Tools® products, you
may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:[email protected]
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!