e-mail:
voice:
360.854.9559
fax:
866.783.1742
21
Status Sentinel 16 Installation and Operation Manual
SPECIFICATIONS
Specifications
Ethernet Interface:
RJ-45, 10base-T or 100base-TX, auto sensing with link &
activity led indicators
- Full/half duplex.
Protocols:
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP,
BOOTP, HTTP, and AutoIP.
Status / Logic Inputs:
All 16 status / logic inputs may be activated either by
pulling the input to ground or releasing the input to a high
state. The action and display is configured through each
inputs status setup web page. External sources can be
contact closures, open collectors or 5, 12, 15 and 24-volt
logic-level sources. The input impedance of each input is
22 K ohms.
Connectors:
Removable euroblock screw terminals. Mating plugs sup-
plied.
EMI / FCC Compliance:
See the Declaration of Conformity page.
Operation is subject to the following two conditions: 1) This
device may not cause harmful interference, and 2) this
device must accept any interference received, including
that which may cause undesired operation.
Required power supply:
7.5 VDC only @ 1 Amp. 2.1mm ID x 5.5mm OD coaxial
connector. Surge protected. Domestic PS supplied.
Operating Temperature:
32 to 122 °F / 0 to 50 °C for all operating voltage ranges.
Humidity:
0 - 90% RH, non-condensing.
Size:
6.18” x 3.70” x 1.42” (L,W,H)
Weight:
2.0 lb.
Options:
* CE certified 240 VAC power supply.
* RA-1, 1-RU rack shelf. Note: User supplied Velcro may
be used to secure the product to the RA-1 shelf.
WEBSITE:
Visit our web site for
product updates and
additional information.
