e-mail:
voice:
360.854.9559
fax:
866.783.1742
12
Smart Relay 4 G2 Installation and Operation Manual
PROGRAMMING
Set Modes
Each of the four channels can be programmed with its own independent mode/logic
function. See the Mode Settings section of this manual for information on the modes
available. The default mode for each channel is: 00.
Current Mode Settings:
CH1: 00
CH2: 00
CH3: 00
CH4: 00
Select1-4
1. Type the channel number 1, 2, 3 or 4.
2. Type a timer value of as a two-digit value (00-15). For example, to set a
channel to mode 05 type: 05 and press enter. To return to the Program menu
press the ESC key.
To exit Program mode, press the ESC key until “EXIT PGM” is displayed. Program
mode will be exited automatically after 60 seconds of keyboard inactivity.
Restoring to factory defaults:
The default program values may be reloaded at any time by removing power from
the Smart Relay 4 G2, holding down the front panel Defaults (Def.) button and
plugging in the power and then releasing the Defaults button after a few seconds.
WEBSITE:
Visit our web site for
product updates and
additional information.