e-mail:
voice:
360.854.9559
fax:
866.783.1742
20
Switcher Sentinel
®
3 »Web Installation and Operation Manual
SETUP
“Email/Network Setup” Web Page – Controls
Save Settings:
After pressing the “Save Settings” button, the device will
reboot (If you changed the IP address, you must navigate your
web browser to the new IP address (if the HTTP port was
changed from port 80, be sure to add the new port number
after the IP: xxx.xxx.xxx.xxx:port #). If you didn’t change the
IP address, then the web page will return to the login screen
after the device reboots.
Reboot Device:
When you press the “Reboot Device” button, the device
resets, you must navigate your web browser to the new IP
address.
Send Test Email:
Press this button to send a test email to recipient #1. When
the email has completed, an alert box will pop-up indicating
the status of the email and an error condition if the email was
not sent correctly. If an email was not sent correctly, please
review your SMTP settings and correct as necessary.
“Email/Network Setup” Web Page
Reload Defaults:
When you press the “Reload Defaults” button, the device
resets to factory default settings, you must navigate your web
browser to the new IP address (if the HTTP port was changed
from port 80, be sure to add the new port number after the IP:
xxx.xxx.xxx.xxx:port #).
Clear Daily Logs:
When you press the “Clear Daily Logs” button, the daily logs
stored in memory will be cleared. Keep in mind that if the
Alarms Cleared Event is enabled, this event will post after the
logs are cleared.
Send Daily Logs:
When you press the “Send Daily Logs” button, the system
will send the daily logs email and then clear those logs as if
the correct time has expired.
NOTE: After you are done making changes to the Email/Network Setup page, you
MUST press the “Save Settings” button to save your changes.
WEBSITE:
Visit our web site for
product updates and
additional information.
