e-mail:
voice:
360.854.9559
fax:
360.854.9479
5
ProMix 12 Installation and Operation Manual
INSTALLATION
BOOTH OUTPUT
The console provides a secondary Booth monitor output (7) that can be used to drive
headphones worn by an announcer in an “announce booth”. This output, via TRS
jack, will drive headphones of 300 ohms or higher. (Termination is not necessary.)
The nominal output level is 0dBm. The mating TRS plus should be wired as follows:
TIP:
Left Booth output
RING:
Right Booth output
SLEEVE:
Ground
CUE/TALKBACK OUTPUTS
The console provides outputs to drive external amplified speakers for monitoring the
Cue bus and Talkback circuit (8). Using the Cue output is optional, as the Cue bus
can be monitored via the Monitor system (with the CueMix function) as well as via
the Phones output. The Talkback output must be connected to an external (ampli-
fied) speaker if this feature is to be used. The Cue and Talkback outputs are unbal-
anced and will drive 600-ohm loads to a nominal level of –10dBm. (Termination is
not necessary.) Inexpensive “computer speakers” are ideal for use with the Cue and
Talkback outputs (audio quality unimportant). The mating TRS plug should be
wired as follows:
TIP:
Cue output
RING:
Talkback output
SLEEVE:
Ground
WEBSITE:
Visit our web site for
product updates and
additional information.
