e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
Mixer Buddy II Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a Broadcast Tools® Mixer Buddy II is a four-chan-
nel microphone and monitor controller (referred to as the Mixer Buddy II through-
out this manual). We’re confident that this product will give you many years of
dependable service. This manual is intended to give you all the information needed
to install and operate the Mixer Buddy II.
SAFETY INFORMATION
Only qualified technical personnel should install the Mixer Buddy II. Any attempt
to install this device by a person who is not technically qualified could result in a
hazardous condition to the installer or other personnel or damage to the Mixer
Buddy II or other equipment. Please ensure that proper safety precautions have been
taken before installing this device. If you are unfamiliar with this type of equipment,
please contact a properly qualified engineer to handle the installation and setup of
the Mixer Buddy II.
Broadcast Tools® Products, as with any electronic device, can fail without warning.
Do not use this product in applications where a life-threatening condition could
result due to failure.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment. If you would like
more information about BROADCAST TOOLS® products, you may reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1503 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:[email protected]
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
Designed, Assembled and Tested in Washington State, USA.
Broadcast Tools is a Veteran Owned Small Business