e-mail:
voice:
360.854.9559
fax:
866.783.1742
9
Audio Sentinel
®
»Web Installation and Operation Manual
INSTALLATION
WEBSITE:
Visit our web site for
product updates and
additional information.
Step 4:
On the Local Area Connection Properties page, double click on Internet
Protocol (TCP/IP) to display properties.
Step 5:
Before making any changes to the network settings, write down the current
settings (or screen capture the page and print) so that they can be restored once the
unit is configured. Next, select the radio button labeled “Use the following IP
address” and type in the IP address 192.168.1.60. Type in the subnet mask of
255.255.255.0. Leave the default gateway field blank. Click OK to apply the new
settings.
Opening the LOGIN Web Page
1. Connect the supplied GRAY colored XOVER cable between the PC’s Ethernet
port and the products “NET” network RJ45’s jack.
2. Connect the supplied 7.5 Volt DC @ 1 amp power supply to the product’s power
jack labeled Power 7.5 VDC. Verify that the green PWR/Heartbeat LED is blink-
ing and the left “LINK” LED above the “NET” Network RJ-45 is illuminated.