BCI USW-88 User’s Manual
Universal 8x8 Matrix Switch
Broadata Technical Support, [email protected]
9
3.0 REMOTE CONTROL
Section 3.1 shows the IR code for the remote control. There are a total
of four dipswitches located at the rear bottom of the remote control.
When dipswitches are all set to ON (upper position), the remote control
is able to control all the outputs and inputs. For example, when output A
wishes to select input 5, first press 1, wait a second, then press 5, and
instantly output display A will show input source 5’s image.
For other settings please refer to Section 3.2. For example, when all the
dipswitches are set to OFF, this setting is for output A, so it can only
control input selections. When output A wishes to select input 3, pressing
3 will allow output display A to only show input source 3’s content. For
additional settings please refer to Section 3.2.
