LBC-HDBT-T/R-48-Lite User Manual
Link Bridge
TM
HDBaseT HDMI Transmission w/48V PoH over 60m
Broadata Technical Support, (800) 214-0222
8
2.2 Receiver Front and Rear Panels
1.
IR2 BLASTER:
Connect to the supplied IR Blaster cable for IR
signal
transmission. Place the IR Blaster in direct line-of-sight of
the equipment to be controlled.
2 . IR1 EXTENDER:
Connect to the supplied IR Extender cables
for IR signal reception. Ensure that remote being used is within
the direct line-of-sight of the IR Extender.
3 . CAT-5e/6/7:
Connect to the Transmitter unit with a single
CAT-5e/6/7 cable for transmission of all data signals.
4 . HDMI OUT:
Connect to a HDMI equipped TV/monitor for display
of the HDMI input source signal.
5.
STD/UPDATE Switch:
This switch is reserved for factory use
only.
6.
RS-232 OUT:
Connect to the device that is to be controlled (via
D-Sub 9-pin female cable) by RS-232 commands.
CAT5e/6/7 IN
IR1
EXTENDER
IR2
BLASTER
HDMI OUT
Front
1
2
3
4
POWER
LINK
RS-232 OUT
STD
UPDATE
Rear
5
6
8
7
