LBC-SPH8-1HB7-EIR User’s Manual
Link Bridge
TM
HDBaseT 7x Transmission System
Broadata Technical Support, [email protected]
9
7.
EDID STD/TV
:
The default setting is TV, when in this mode, the unit will detect
the EDID settings of the display device connected to the
CAT- 5e/6/7 Output 1. If it detects a 4K×2K capable EDID
setting it will transmit the signal in that format to the output port.
If no 4K×2K capable EDID is detected then the unit will detect
the EDID settings and send out the signal that all outputs can
accept.
This device has a last memory function and will retain the EDID
settings of the last device connected via the CAT5e/6/7 output
port when it is not connected to a display after power cycling.
Switch to the STD setting to use the unit’s built-in EDID if there
are display problems. In this mode, the video output will be set
to 1080p@60Hz and the audio at LPCM 2CH Stereo.
8
. SERVICE
:
Reserved for manufacturer use only.
9
. DC 24V
:
Connect the 24V DC power supply to the unit and plug the
adaptor into an AC outlet.
