LBC-HDBT-Lite User’s Manual
Link Bridge
TM
HDbaseT HDMI Transmission System
Broadata Technical Support, [email protected]
7
2.2 Receiver Front and Rear Panels
1.
RS-232 Out:
Connect to the device that is to be controlled (via
D-Sub 9 pin female cable) by RS-232 commands.
2.
IR 1 Blaster:
Connect to the supplied IR blaster cable for IR
signal transmission. Place the IR blaster in direct line of sight
of the equipment to be controlled.
3.
IR 2 Extender:
Connect to the supplied IR receiver cables for
IR signal reception. Ensure that remote being used is within the
direct line-of-sight of the IR extender.
4.
HDMI Out:
Connect to a HDMI source equipment such as a
DVD or Blu-ray player.
5.
Link LED:
The yellow LED will illuminate when both the input
and output signals are connected.
6.
Power LED:
This blue LED will illuminate when the device is
connected to a power supply.
7.
CAT5e/6 In:
Connect to the receiver unit with a Single CAT5e/6
cable for tranmission of all data signals.