Broadata Technical Support, [email protected]
8
1. IR IN: Connect the supplied IR Receiver cable for IR signal
reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
2. IR OUT: Connect the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
3. CAT5e/6/7 OUT 1~3: Connect to CAT5e/6/7 to HDMI Receivers
with a single CAT5e/6/7 cable each to extend the HDMI signal
up to 100 m.
MODE LED: This LED will illuminate when the power is connected.
LINK LED: This LED will illuminate when connected to a Receiver
unit that is connected with a TV/monitor that is displaying the
signal.
2.2 Rear Panel
LBC-SPH4-1H3B-IR User’s Manual
Link Bridge HD BaseT 3x Transmission System
TM
Содержание LBC-SPH4-1H3B-IR
Страница 2: ......
