LB-LB-ICP/LB-KP8 User’s Manual
Link Bridge
TM
Inline Control Processor/Keypad, w/RS-232 Interface
Broadata Technical Support, (800) 214-0222
20
Configure Auto Action
The
Configure Auto Action
page is used to configure a set of auto
actions based on a selected trigger. Available triggers are Video Detect,
Digital Input 1 and Digital Input 2. The available actions are Relay, RS-
232 and IR. Digital Output actions are only available if Digital IOs are
configured as outputs in the
Configure System
page. All three triggers
work independently and can be triggered simultaneously.
On the top menu click
Configure
and then click
Auto Actions
.
The
following page will be displayed:
Trigger
: Select the auto action trigger. Available triggers are Video
Detect Line, Digital Input 1 and Digital Input 2.
Trigger When
: Select
High
for the High signal trigger. Select
Low
for
the Low signal trigger. For the Video Detect Line, the trigger options
are when Video Detect Line is
Asserted
or
De-asserted
.
Refer to the
Configure Key Action
sections for the rest of the pull
down menu descriptions.
