Basicsetup | Add house battery
20
Connect house
battery wiring
To connect house battery wiring, follow
these steps:
A | Connect wiring to battery bus
At the battery bus end of the wiring:
1. Attach the fuseholder[+] ring
terminal to a positiveterminal[+] on
the battery bus.
2. Secure the wire with cable ties and
mounts.
B | Connect wiring to common
ground
At the common ground end of the wiring:
1. Attach the black[-]wire ring terminal
to the commonground[-]terminal.
2. Secure the wire with cable ties and
mounts.
C | Connect wiring to LIME
At the LIME end of the wiring:
1. On the mobile device, open BRNKL
and disarm [page 38].
2. On the bottom of the LIME, remove
the green connector [page 37].
3. On the connector, loosen the screws
above slot10 and slot14.
4. Insert the red[+] wire into slot10,
then tighten the screw to fasten.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
5. Insert the black[-] wire into slot14,
then tighten the screw to fasten.
6. Reattach the connector [page 37].
7. Secure the wires.
D | Insert fuse
At the battery bus end of the wiring:
•
Insert a 3A fuse into the fuse holder.
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Содержание archipelago LIME LSGI1021
