![Brizo MultiChoice Virage 60 Series Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/brizo/multichoice-virage-60-series/multichoice-virage-60-series_installation-instructions-manual_2814703006.webp)
4
60 Series Installation
2
Showerhead and Tub Spout Installation
FOR TUB SPOUT INSTALLATION:
Install 1/2" (13 mm) threaded pipe nipple (1) to
extend past finished wall (2) per dimension (3).
Connection of deck mount spouts to in–wall
valves is not recommended. Neither is the use
of hand showers connected to tub spouts in a
tub/shower push button diverter combination, or
hand showers connected in lieu of a tub spout
to a tub / shower valve.
Piping between valve body and tub spout must
be a minimum of 1/2" (13 mm) copper pipe
or 1/2" (13 mm) iron pipe in a
straight
drop
no less than 8" (203 mm) but no more than
18" (457 mm) long with only
one
iron pipe or
copper 90 degree elbow to the tub spout nipple.
VIRAGE™ SHOWERHEAD AND
SHOWER ARM INSTALLATION:
Install a
1/2" threaded pipe nipple to extend beyond the
finished wall 3/8" to 1/2". Apply Teflon
®
tape to
thread on pipe nipple and screw brass adapter
(1) securely onto nipple. Apply Teflon
®
tape to
outlet end of shower arm and screw showerhead
(2) onto the shower arm (3), using provided
wrench (4) to tighten securely. Check position of
set screw on top of shower arm (3) making sure it
is not sticking through to the inside opening
where it could interfere with the assembly. Slide
shower arm and head assembly over the adapter
and tighten set screw against the adapter.
1
2
3
4
1
3
(3) = 3/8" - 1/2" (9.5 mm - 12.7 mm)
2
RP62605
s
A.
B.
Install a 1/2" threaded pipe nipple to extend
beyond the finished wall 3/8" to 1/2". Apply
Teflon
®
tape to thread on pipe nipple and screw
brass adapter (1) securely onto nipple. Check
position of set screw on bottom of spout (2)
making sure it is not sticking through to the
inside opening where it could interfere with the
assembly. Slide tub spout over the adapter and
tighten set screw, on bottom of spout, against
the adapter.
Note: This spout utilizes a pull
down diverter mechanism. To divert from
spout to shower, pull down on spout tip (3).
1
2
3
NOTE: It is suggested that you anchor your shower arm and tub spout
elbows or water lines.