5
5
6
6
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Note:
All the pictures in this manual are for
explanation purpose only. They may be
slightly different fromthe air conditioner
you purchased(depend on model).
The actual shape shall prevail.
Indoor unit
Outdoor unit
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver
7. Display panel
8. Connecting pipe, drain hose
9. Air inlet (side and rear)
10. Air outlet
Indoor unit
Outdoor unit
Special function
CLEAN AIR function(on some models)
Follow Me function(on some modles)
To activate the Follow Me feature, point the remote control towards the unit and press the
Follow Me button. T
If the unit does not receive the Follow Me signal during any 7 minute interval,
he remote display is actual temperature at its location. The remote
control will send this signal to the air conditioner every 3 minutes interval until press the
Follow Me button again.
the Follow Me
mode will be cancelled automatically.
The remote control serves as a remote thermostat allowing for the precise temperature
control at its location.
Improving the quality of indoor air is one of the mission of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector (Depending on specific
configuration of the model).
With the anions generated by Ionizer, the air circulation of the air conditioner fills the room
with refreshing, natural and healthy air. The Plasma Dust Collector generates an high voltage
ionization zone, through which the air is converted to plasma. Inside the air most of the dust,
smoke, and pollen particles are captured by the electrostatic filter.
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will
continue operating for about 7-10 minutes (depending on models) at LOW fan speed.
This will help to dry up the condensed water inside the evaporator, and prevent the
breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely
off.
Anti-mildew function(on some models)
4
3
5
2
6
1
9
10
8
7
TIMER
POWER
AUTO
Infrared signal receptor
DEFROST
1
2
3
4
5
Indicator Lights on Display panel
OPERATION indicator:
The indicator flashes once every second
after power is on and illuminates when
the air conditioner is in operation.
TIMER indicator:
The indicator illuminates when TIMER is
set ON/OFF.
DEFROST
Indicator
This indicator illuminates when the air
conditioner starts defrosting automatically
or when the warm air control feature is
activated in heating operation.
AUTO indicator:
This indicator illuminates when the air
conditioner is in AUTO operation.
1
2
3
4
5
DIGITAL DISPLAY:
A) Usually it displays the temperature settings. When change the setting temperature, this
indicator begins to flash, and stops 20 seconds later.
B) It displays the room temperature when the air conditioner is in FAN only operation.
C) Displays the malfunction code or protection code under abnormal conditions.
C
Parts names
Содержание Reverse Cycle Inverter Hi-wall Air Conditioner
Страница 1: ...2020330A4419 ...
