Brivis B061526 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 16

Brivis B061526 Скачать руководство пользователя страница 3

1

2

Read the safety precautions carefully before installing the unit.

Means improper handling may lead to personal death or severe injury.

Means improper handling may lead to personal injury or property loss.

WARNING

CAUTION

Only suitably trained and qualied personnel should install this equipment.
Installation by other non-qualied persons will result in a poor installation, and

Install this product in strict accordance with this manual.
Maintenance, repair or service must be performed by suitably trained

improper service or repair may lead to electric shock or re.

WARNING

Do not install this product adjacent to areas susceptible to ammable gas leaks.
If ammable gases leak near the control, it may cause a re.
Do not operate with wet hands or let water enter the control. Otherwise,
electric shock may occur.
The wiring should be suitably sized for the control current. Incorrectly sized wiring
may overheat and cause a re.
The specied cables shall be applied in the wiring. Do not allow external forces
to pull on the terminals. Damage to the control and overheating may cause a re.

NOTE

2

3

4

2. INSTALLATION ACCESSORIES

1. SAFETY PRECAUTION

1

1

3
4

1

2

1

1

Don’t install in an area contaminated with heavy oils, vapors or gases that may
cause the control to deform, this may lead to a system malfunction.

Select the appropriate installation location

Preparation before installation

1. Please conrm that the following parts have been supplied.

2. Additional eld supplied requirements.

Wired programmable control

1

Lithium battery

No.

No.

Name

Name

Qty.

Qty.

Remark

Remark

To mount the control

To dismantle the control assembly

Phillips screwdriver

Slotted screwdriver

Installation & owner’s manual

Connecting wiring loom

Stated below are important safety issues that must be obeyed.

possibly electric malfunction, shock, re or personal injury.

and qualied personnel, in accordance with the maintenance instructions

1

Part Number B026004

2

1
1

To connect to the indoor unit

«
1
2
3
4
5
...
»

Содержание B061526

















Отзывы:

Нет отзывов