3
Fixing the legs
Insert barrel nut (d) into the small holes under the wooden cross bar (6). Also insert
70mm bolts (a) into the hole on reverse T-shape frame.
Assemble the reverse T-shape frame (1R & 1L) with wooden cross bar (6).
Fixing the adjusters
Insert 12 mm bolt (c) into the holes under the plastic adjuster (7 & 8).
Assemble the seat board (4) with plastic adjuster left (7) and plastic adjuster right
(8).
Assemble the footrest (5) with plastic adjuster left (7) and plastic adjuster right (8).
EN
Seat board & footrest
Insert footrest (5) and seat
board (4) into reverse T-shape
frame.
Then screw the knobs (9) to the
position as shown. Do not
tighten yet!
Notice: For easier assemble the
back rest please be sure the
footrest and seat board are at
the lowest position as shown.
