1)
Remove the mounting bracket from rear of the
appliance by moving the bracket down
and
out from
the appliance.
2)
Find the optimal place to mount your appliance.
Consider the proper position relative to your room,
placement of furniture and windows.
3)
Hold the mounting bracket up to the wall to verify
the correct location and ensure that the mounting
bracket is level. Use a pencil to mark the 6x
mounting holes on the wall at the desired mounting
location, using the mounting bracket as a template.
4)
Drill a 8mm diameter holes to at least 50mm deep
on the marked points.
NOTE: If installing the mounting bracket to a wall stud, there
is no need to drill the holes in the wood and no need for the
plastic wall anchors. It is recommended to install the mounting
bracket to at least one wooden stud.
5)
Tap the 6x wall anchors into the pre--drilled holes
with a hammer until they are flush with the wall.
6)
Secure the mounting bracket to the wall by using all
6x wall-fixing screws.
7)
Re-install the appliance back onto the wall bracket.
8mm
50mm
The installation should be carried out by two adults to
avoid injury or damage. If for any reason it is considered
too heavy, please obtain assistance.
335mm
335mm
350mm
//
10
© 2019 British Fires
