British Fires 18.0 NEW FOREST 1200, Инструкция по установке и эксплуатации

Страница: 19 / 49

Standby Button:
Turns the appliance ON/OFF
standby, the default settings are:
heater set to 82°F/27°C, the
main flame effect is F1, the Fuel
bed is L1 (no temperature display).
Changing Flame Effect:
In the power-on state, press this
button, the digital screen displays
the flame position and the flame
indicator is bright, and the main
flame position can be adjusted.
The flame brightness settings are:
F1, F2, F3, F4, Set as follows:
Button Display Flame Effect
1st Press F1 Full
2nd Press F2 Medium
3rd Press F3 Low
4th Press F4
cycle through
settings
Heating Operations:
1)
Press the heater button to turn
the heating function on and off
and adjust the temperature
setting. Heater is divided into
temperature settings: 62°, 63°,
64°, 65°, 66°, 67°, 68°, 69°, 70°,
71°, 72°, 73°, 74°, 75°, 76°, 77°,
78°, 79°, 80°, 81°, 82°, ON, 62°F.
(Circular operation control)
2)
Press and hold the heater
button for 3 seconds to convert
the temperature unit from °C to
°F. The temperature display
window will flash. After the
temperature is set, the display
unit will flash 5 times, then
automatically save the settings
and exit the setting state. After
the display unit is turned on, if
there is no operation within 10
seconds, the setting status is
also exited.
3) Fan delay function:
After the
appliance is turned off, the fan will
continue running for 15 seconds
then stop.
Open Window Detection function:
When the appliance is heating
and the ambient temperature
suddenly drops ≥–5°C (9°F) within
10 minutes, and the environment
cannot be warmed up within 30
minutes the appliance will
automatically display “OP”. The
heating function will then be
automatically turned off, and when
the “OP” is displayed, it can be
turned off and then restarted by
turning off and on the appliance to
clear the fault code.
4)
This appliance has a non-self-
resetting overheat protection
device (thermal cut-out) which will
activate if the air inlets or outlets
are obstructed. For safety
reasons the fire will NOT switch
on again automatically, the
following procedure must be
carried out before the fire can be
operated.
NOTE: The flame-effect will remain operational if
the cut-out is activated, only the fan heater is
prevented from working.
Switch OFF the appliance at the
wall socket or outlet. Leave the
fire OFF for a period of no less
than 10 minutes, ensuring all
obstructions are removed. Switch
the appliance ON at the wall.
Ensure the appliance is turned ON
at the control switches. If the fire
fails to operate correctly, repeat
the above procedure.
Refer to section 13.0 for more information about
the Safety Cut-Out System.
Fuel Bed Color Options:
Once powered, press the “Fuel
Bed” button and the LCD screen
on the remote will display the fuel
bed icon. Now, the fuel bed color
can be adjusted. The different
settings are: L1, L2, L3, L4; Fuel
bed light. Set as follows:
Button Display Flame Effect
1st Press L1 Orange
2nd Press L2 Blue
3rd Press L3 Blue
4th Press L4
Cycle through
settings
Setting Sleep Timer:
In the timed display, press the
“Sleep Timer” button to adjust the
time, plus one hour for each
press. (You can’t enter the weekly
timing selection, you can only set
the current automatic shutdown
time. This function is available
when the weekly timing function is
turned on. Will not operate).
Timing range: 1H, 2H, 3H, 4H, 5H,
6H, 7H, 8H, 9H, OF, 1H (cycle
adjustment).
Control Down Lighting:
Turns the down lighting lights on
and off.
Setting Clock and Timer:
Use the date button to choose
from Monday to Sunday or week
timer mode option. Option mode:
1-2-3-4-5-6-7-A-oF.
Clock setting:
1)
At standby state (after the unit
is plugged in and before pressing
“main power”), press and hold the
Setting button on the remote for
3 seconds, the digital display will
then flash “00:00”.
2)
Press on the remote control
to set the hour, press the remote
control to set the minutes.
3) Press “Setting” to enter the
setting of the week timer. Press
to select Sunday to Saturday,
The date symbol will light up after
the day is selected. When finished,
press the button to exit setting.
NOTE: The current clock must be set after the
initial power-on or power-off, otherwise the clock
will remain “00:00” status and you won’t be able
to set the week timer function.
// 12.0 OPERATING THE APPLIANCE
//
31
//
32 © 2020 British Fires