3 DISPLAY PANEL OPERATION
2008.9.19
9
3.7
ID ADDRESS
ID
Enter the
ID
mode to set the ID ADDRESS.
3.8
SPECIAL SETTINGS
SETTING
Select
Upload
to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will be full on..
If an error occurs when uploading the MASTER and/or SLAVE units will display
AMBER.
On successful uploading of the custom programs the MASTER and SLAVE units
will display WHITE.
In order to reset custom modes to default values select
PESET Parameter
.
Enter
ID ON/OFF
in order to allow/disallow ID address function from the
DMX512 controller.
3.9
A CTIVATE THE PASSWORD
KEYLOCK
Enter the
KEYLOCK
mode to select whether the access password is on or off.
In order to enter access password it is necessary to first press
SET
.
Access password is
UP
+
DOWN
+
UP
+
DOWN
.
CALIB
Enter the
CALIB
to select white color of different color temperature.
There are 8 pre-programmed White colors can be edited
by using
White
&
Amber
.
3.10
WHITES SETTING
PASS
ON
OFF
MODE
CALI
W1
W2
W8
W.(0~255)
A.(0~255)
MODE
SET
UPLd
IdON
PASS
ON
OFF
SENd
ENd
REST
PASS
REST
MODE
Id
I(001~066)
MODE
