Briteq LDP COLORSTRIP 12FC, Руководство по эксплуатации

Страница: 10 / 16

ENGLISH USER MANUAL
BRITEQ
®
8/13 LDP-COLORSTRIP 12FC/24FC
DEFAULT SETTINGS
This is your emergency exit if you really messed up the settings: just return to factory settings.
Also 2 user settings can be saved/loaded.
•
Press the
[MENU] or ▼/▲ buttons until the desired function is showing on the display.
•
Press the [ENTER] button: the values can be changed
•
Use
▼/▲ buttons to selected the desired settings:
•
[FACTORY]
•
[USER1]
•
[USER2]
•
Press the [ENTER] button:
•
[FACTORY] was selected: the display shows [LOAD]
•
Press the [ENTER] button: the display shows [CONFIRM]
•
Use
▼/▲ buttons to select [YES / NO]
•
Press the [ENTER] button to confirm.
•
[USER1] / [USER2] was selected: the display shows [ACTION]
•
Use
▼/▲ buttons to select [LOAD] / [SAVE]
•
Press the [ENTER] button to confirm: the display shows [CONFIRM]
•
Use
▼/▲ buttons to select [YES] / [NO]
•
Press the [ENTER] button to confirm.
•
[SAVE] was selected: the current settings of the setup menu are saved to memory.
•
[LOAD] was selected: the previously saved settings are loaded.
PARAMETER name Defaults
12FC
Defaults
24FC
USER defaults 1 USER defaults 2
DMX Channel mode 4CH RGBW 4CH RGBW Current setting in the menu Current setting in the menu
AUTO RUN
SPEED = 50
Repeat = 3
SPEED = 50
Repeat =3
Current setting in the menu Current setting in the menu
EFFECT MODE
CFADE speed=50
+ FL = 00
CFADE speed=50
+ FL = 00
Current setting in the menu Current setting in the menu
Flow invert OFF OFF Current setting in the menu Current setting in the menu
CUSTOM Static color RGBW = 255 RGBW = 255 Current custom color settings Current custom color settings
MASTER DIM 100% 100% Current setting in the menu Current setting in the menu
WHITE BALANCE RGBW = 255 RGBW = 255
Current white balance settings
for all pixels are saved
Current white balance settings
for all pixels are saved
DIM Curve Square Square Current setting in the menu Current setting in the menu
DIMMER SPEED 100 (0440ms) 100 (0440ms) Current setting in the menu Current setting in the menu
Auto Lock Menu OFF OFF Current setting in the menu Current setting in the menu
No DMX mode Freeze Freeze Current setting in the menu Current setting in the menu
FIRMWARE VERSION
Used to show the current version of the firmware.
•
Press the [MENU] button until the [FIRMWARE] is showing on the display.
Note:
The firmware of this unit can be upgraded using our special “Firmware Updater 2” (separately available
from Briteq). More information about this can be found in the user manual of the firmware updater or our
website: https://briteq-lighting.com/firmware-updater-2