Briteq BT-AKKUPOLE, Руководство по эксплуатации, Страница: 7 / 12

ENGLISH OPERATION MANUAL
BRITEQ
®
5/8 BT-AKKUPOLE
2. Wired DMX-input + DMX-out ( DISPLAY = XLR IN XLR OUT ):
You can also connect the projector to a DMX-controller by using the standard XLR in/outputs. Just select
the option
XLR IN XLR OUT and set the desired DMX address:
•
Press the ENTER-button for about 2s: the DMX-address starts blinking.
•
Press the
↑/↓-buttons to set the DMX-address and confirm with the ENTER-button.
3. Standalone, manual use ( DISPLAY = MANUAL XLR OUT ):
Just select the option MANUAL XLR OUT and set the desired dimmer level:
•
Press the ENTER-button for about 2s: the DIM: xxx% text starts blinking.
•
Press the
↑/↓-buttons to set the desired output and confirm with the ENTER-button.
You can connect other projectors to the XLR-output: the dimmer level is automatically sent to the
connected projectors.
ELECTRICAL INSTALLATION
Important: The electrical installation should be carried out by qualified personal only,
according to the regulations for electrical and mechanical safety in your country.
Standalone operation:
Put all units in MANUAL XLR OUT mode and follow the instructions in the previous chapter for setup.
OPTION 1: use completely separate units.
OPTION 2: Manual setting on the 1 st unit with further daisy chaining using DMX-cables (other units
must be operated in XLR IN XLR OUT mode with DMX address set to 001.
Wireless DMX:
Put all units in WDMX IN XLR OUT mode and follow the instructions in the previous chapter for setup.
OPTION 1: Completely wireless