Instructions for Installation & Use
87
Consult the vehicle owner’s handbook for location of anchorage fittings or anchorage points
and the possible use of spacers. Some vehicles may have an anchor fitting fitted by the
vehicle manufacturer. If anchorage points cannot be found refer to car manufacturer or local
child restraint fitting station or traffic authority for optimum position of upper anchorage point
and the use of spacers.
TOP TETHER STRAP
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical panel can only be installed in
one way. Please refer to vehicle owner’s handbook or a child restraint fitting station for correct
method.
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
UPPER ANCHORAGE POINT. BEFORE EACH USE OF THE RESTRAINT ALWAYS
ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE
UPPER ANCHORAGE POINT AND NOT HOOKED TO OR FITTED TO, ANY
OTHER OBJECT. THIS IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS
STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED
PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT:
INSTALLATION
OF VEHICLE UPPER ANCHOR POINT
