Instructions for Installation & Use
Instructions for Installation & Use
64
65
D. Feed the straps through the Gated 3-Bar Slide to
remove any slack.
Use this seat belt configuration to install the child restraint
according to the instructions on pages 27 to 28.
Remove any slack in the lap belt to ensure the base is held
firmly against the seat back. This may require adjustment of
the strap through the gated 3-bar slide.
Sash belt
portion
Lap belt
portion
When fitting the Curved Gated Slide, the seat belt route
can only go one way, as shown above.
ALTERNATIVE INSTALLATION IF SEATBELT
LOOSENS
Remove the gated 3 bar
slide from the seat belt as
soon as the child restraint
is removed so that an adult
can use the seat belt as a
lap-sash seatbelt.
IMPORTANT:
DO NOT LEAVE THE CHILD IN THE BABY CAPSULE FOR EXTENDED PERIODS.
THE TRAVEL SYSTEM BABY CAPSULE IS DESIGNED TO PROVIDE MOBILITY
OUTSIDE OF THE CAR BUT IT SHOULD NOT BE USED IN PLACE OF AN
APPROPRIATE COT.
THE BABY CAPSULE MUST ONLY BE USED WITH STROLLERS WITH COMPATIBLE
ATTACHMENTS. WE RECOMMEND SAFE-N-SOUND AND STEELCRAFT
STROLLERS.
IF IN DOUBT ABOUT THE METHOD OF INSTALLATION, CONTACT BRITAX
CHILDCARE CUSTOMER SERVICE ON 1300 303 330 AU/ 0508 688 822 NZ.
This Baby Capsule is designed to be connected to compatible strollers. The following
pages provide general instructions about using the Baby Capsule with a stroller, this
may differ slightly for some strollers. Use the attachment instructions provided with your
stroller. Use the stroller in accordance with the instructions supplied with the stroller. This
Baby Capsule will not fit all strollers.
There are two methods of connecting the Baby Capsule to the stroller. Check with the
stroller instructions or promotional literature to see which system applies.
•
Integral latch which fits to the arm bar or tray, or
•
Britax CLICK & GO™ Adaptor (not supplied) that fits to the receivers on the
stroller side armrests.
TRAVEL SYSTEM
The stroller instruction manual will provide full instructions on use of the stroller.
