background image

28

29

discard the foam inserts found under the cover.

This child seat is certified for aircraft use. Most airlines 

in the US and Canada will allow use of a child seat if it is 

labeled as an approved child seat for airline use and fits 

properly on plane. Contact the airline about their policy 

prior to traveling.

The FAA recommends that a child weighing up to 40 pounds (18.1 

• 

kg) use a certified, harnessed child seat while 

traveling on an aircraft.

Install  your  child  seat  in  a  window  seat  to 

• 

avoid blocking the aisle.

If the aircraft lap belt is too short, ask the flight 

• 

attendant for a belt extender.

Rear-Facing Installation

For rear-facing aircraft installation (Fig. A), follow 

Rear-Facing Lap-Belt Installation

 instructions on 

pages 20 - 21.

Forward-Facing Installation

For  forward-facing  aircraft  installation  (Fig. 

B),  follow 

Forward-Facing  Lap-Belt  Installation

 

A

b

Installation: Aircraft

Installation: Versa-Tether

®

Safety Information

WARNING!

When  using  the  child  seat  in  forward-facing  mode,  attach  the 

• 

Versa-Tether  only  to  tether  anchors  identified  by  the  vehicle 

manufacturer as tether anchorage points. Use of other locations 

is not approved or permitted.

DO  NOT

• 

  modify  the  vehicle  without  advice  from  the  vehicle 

manufacturer if a tether anchorage is not available. 

IMPORTANT:

  

Britax  recommends  that  the  tether  be  used  at  all  times.  Using  the 

• 

tether will improve the stability of the child seat and reduce the risk 

of injury.

If your vehicle does not currently have a tether anchor attachment, refer 

• 

to your vehicle owner’s manual or contact the vehicle manufacturer 

for assistance.

Содержание ROUND ABOUT 50


























Отзывы: