Britax PARKWAY SGL, Руководство пользователя

Страница: 17 / 39

30 31
5 Route the lap part of the vehicle seat belt
under both armrests and over both base
belt guides (Fig. D).
NOTE: The shoulder part of the vehicle seat
belt should be routed under the armrest on the
buckle side.
6 Verify the vehicle seat belt is not twisted
and then fasten across the child (Fig. E).
7 Route the lap part of the vehicle seat belt
through the SecureGuard clip (Fig. F).
* The lap part of the vehicle seat belt should
rest low on the child’s upper thighs.
8 Remove slack from the vehicle seat belt.
* Proper positioning is achieved when the
shoulder belt lies across the center of the
child’s chest and is positioned at or above
the child’s shoulder.
E
D
F
Checklist
9
Vehicle seat belt is not twisted.
9
Vehicle seat belt is securely fastened.
9
Shoulder part of the vehicle seat belt is routed through the shoulder
belt guide at or above the shoulder.
9
Lap part of the vehicle belt is routed through the SecureGuard clip
and rests low on child’s upper thighs.
9
Vehicle seat belt is properly positioned.
NOTE: Before using the booster seat
without the backrest, you may need to
complete the removal instructions on
page 15.
1
Place the booster seat on the vehicle
seat and push it back against the
vehicle seat back (Fig. A).
2
Sit your child in the booster seat.
3
Pull the vehicle seat belt out, then
route the lap part of the vehicle seat
belt under both armrests and over
both base belt guides (Fig. B).
NOTE: The shoulder part of the vehicle seat
belt should be routed under the armrest on
the buckle side.
B
a
Positioning the Booster Seat and Securing Your
Child without Backrest
BEFORE YOU BEGIN:
9
If the vehicle seat back is adjustable, ensure it is in the upright
position before placing the booster seat on the vehicle seat.
9
Ensure the booster seat is positioned in a location that has a
vehicle head restraint.
Positioning the Booster Seat and Securing Your Child Positioning the Booster Seat and Securing Your Child