Britax MARATHON 70 Скачать руководство пользователя

Страница: 68 / 70

This child seat was manufactured by Britax Child Safety, Inc. Britax

warrants this

product to the original retail purchaser as follows:

LIMITED ONE-YEAR WARRANTY

This product is warranted against defective materials or work man ship for one year

from the date of original purchase. Proof of purchase is required. Your exclusive

remedy for this warranty is that Britax will, at its option, provide repair or replacement

components for this product. Britax reserves the right to discontinue or change

fabrics, parts, models or products, or to make substitutions.

To make a claim under this warranty, you must contact Britax Consumer Services at

1-888-427-4829 or write to us using the address on the back cover of this booklet.

PLEASE COMPLETE AND MAIL THE OWNER REGISTRATION

CARD WITHIN (30) DAYS OF PURCHASE

You may also register online at www.BritaxUSA.com/registration.

WARRANTY LIMITATIONS

This warranty does not include damages which arise from negligence, misuse or

use not in accordance with the product instruction.

The use of non-Britax Child Safety, Inc. covers, inserts, toys, accessories, or

tightening devices is not approved by Britax. Their use could cause this child seat

to fail Federal Motor Vehicle Safety Standards or not perform as intended in a crash.

Their use automatically voids the Britax warranty.

LIMITATION OF DAMAGES

The warranty and remedies as set forth above are exclusive and in lieu of all others,

oral or written, express or implied. In no event will Britax, or the retailer selling this

product, be liable to you for any damages, including incidental or consequential

damages, arising out of the use or inability to use this product.

LIMITATIONS OF WARRANTIES AND OTHER WARRANTY TERMS

AND STATE LAWS

Any implied warranties, including implied warranties of merchantability and fitness

for a particular purpose, shall be limited to the duration and terms of the express

written warranty. Some states do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or consequential damages,

so the above lim i ta tions may not apply to you. This warranty gives you specific legal

rights, and you may have other rights, which vary from state to state. Neither Britax,

nor the retailer selling this product, authorizes any person to create for it any other

warranty, obligation, or liability in connection with this product.

Warranty

Содержание MARATHON 70







































































Результаты поиска

Содержание MARATHON 70

Отзывы:

Похожие инструкции для MARATHON 70

Бренды по названию

Популярные бренды

Britax MARATHON 70, Руководство пользователя

Результаты поиска

Содержание MARATHON 70

Отзывы:

Похожие инструкции для MARATHON 70

Бренды по названию

Популярные бренды