manualshive.com logo in svg

Britax CONVERTIBLE CHILD RESTRAINT, Инструкция по установке и эксплуатации

Поделиться
Скачать
Britax CONVERTIBLE CHILD RESTRAINT Скачать руководство пользователя страница 22

HOW TO CLEAN

Harness 

Adjustment 

Strap.

The restraint has a flame retardant cover which is removable for cleaning. Cleaning 
instructions are on the care label attached to the cover. If fluffy cover is fitted then washing 
cover prior to use will remove excess fluff. Ensure that the inside of the buckle is free of 
foreign matter. Cleaning instructions are on page 23. Use only mild soap and water to clean 
all metal and plastic parts of the restraint.

Remove the restraint from vehicle as instructed on page 6.

Disengage harness tongues from harness buckle.

Remove any accessories, if fitted as instructed on page 24.

Disengage harness straps from harness Strap Connector as instructed on page 17, item 

B.

  Unhook the cover at the top and bottom of the restraint. Peel cover from outer rim 

of 

the body starting from       on both sides and then at       , at the top.

Remove the cover while feeding the Harness Tongues & Crotch Buckle through the lap 

and crotch strap slots in the cover.

Feed  the  Harness  straps  and 
Harness  Tongues  through  Lap 
Strap  Slots  and  through  matching 

shoulder  strap  slots  in  the  cover 
and  seat.

Stretch  cover  over  the  top  of  the 
restraint  first  at         then  the  sides  at      
as  instructed  above  and  then  stretch       

the  cover  around  the  rim  of  the  restraint. 

Re-fit  the  Seat  Cover  attachments.

Re-engage  harness  straps  to  Harness 
Strap  Connector  as  instructed  on  page 

     10  (rear  facing)  or  page  17  (forward  facing),        
      item  D  to  F.

Feed  Crotch  Buckle  through  slots  in  cover.

The cover has been designed to protect your child when 
seated in the restraint. Care should be taken if children 
either eat or drink while in the restraint as some food or 
drink products may cause damage or marking to the cover.

 

TO  REMOVE  COVER:

TO  REPLACE  COVER:

A

A.  

B.  

C.  

D.  

E.

F.  

 

.

B.

C.

D.

E.

COVER

 

(STYLE MAY VARY)

Do not remove Harness Adjustment Strap from Harness Adjustment Strap Lock.

IMPORTANT: Do not pull sticky items from covers as the cover may be damaged - soak in 
water and gently remove.  

Shoulder

Strap Slots 

Forward & Rearward Facing 

22

Содержание CONVERTIBLE CHILD RESTRAINT





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды