Britax BOB Gear Duallie CS1011, Инструкция по эксплуатации

Страница: 12 / 56

12
OMB11
3. Slide Covers Down
Push to slide each Cover (at front
of stroller Accessory Adapters)
down on each side of stroller,
exposing each Receiver Socket.
INSTALLING ICSA
1. Align Locking End Caps
Align and insert each Locking End
Cap on ICSA into each respective
Accessory Adapter Receiver Socket.
CLICK
CLICK
2. Verify Proper Installation
Pull on center of ICSA Front Tube to
verify ICSA is securely locked into
place.
Failure to attach ICSA securely to
stroller may result in serious injury
or death.
PREPARING TO ATTACH
INFANT CAR SEAT
NOTE: Follow steps 1-3 to prepare
car seat and stroller for installation,
then proceed to section for your
brand Infant Car Seat and follow
installation steps in sequence.
When attaching Infant Car
Seat to ICSA for the first time,
practice attaching and removing
unoccupied Infant Car Seat several
times until the function becomes
familiar.
Failure to securely attach Infant Car
Seat may result in accident,
serious injury or death.
1. Prepare Stroller
Set parking brake, rotate canopy towards
handlebar, place Restraint Belt ends to
the sides of stroller seat.
2. Place Infant Into Infant Car Seat
Fasten harness securely (see Infant Car
Seat owner’s manual if necessary).
Failure to properly secure infant
with seat harness of Infant Car
Seat may result in accident, serious
injury or death.
3. Position Infant
Car Seat Carry
Handle
Move Infant Car Seat
Carry Handle into
upright position.