manualshive.com logo in svg

Britax BABY SAFETY CAPSULE, Инструкции по установке и использованию

Поделиться
Скачать
Britax BABY SAFETY CAPSULE Скачать руководство пользователя страница 22

Instructions for Installation & Use 

- Series number:  2030/A/2010

Instructions for Installation & Use 

- Series number:  2030/A/2010

42

43

ONLY USE A 5/16 UNC GRADE 5 BOLT. IF THE 
BOLT IS NOT THE CORRECT LENGTH THE CAR 
MANUFACTURER’S HAND BOOK CAN PROVIDE 
ADVICE ON THE CORRECT LENGTH BOLT.

CHILD RESTRAINTS MUST NOT BE ATTACHED TO 
UNSOUND METAL OR TO WOOD, OR SYNTHETIC 
STRUCTURES. WHEN DRILLING 9 MM HOLE DO 
NOT DRILL THROUGH FUEL LINES, FUEL TANKS, 
ELECTRICAL WIRING, OR RADIO SPEAKERS. 
WEBBING STRAPS MUST BE PROTECTED FROM 
SHARP CORNERS AND EDGES. THE ANCHOR 
FITTING MUST BE USED ONLY AS DESCRIBED 
ABOVE. IT MUST NOT BE HOOKED ONTO ANY 
OTHER OBJECT. 

 

CAR INSTALLATION ACCESSORIES 
(From retailers of Safe-n-Sound products)

EXTRA ANCHOR KITS:

 Available for using the restraint in additional cars.

Re-order no: 0038

EXTENSION STRAPS: May be required for cars without a fixed parcel shelf.

Re-order no: 0035 (length 300mm) or 
                    0036 (length 600mm)

GATED 3-BAR SLIDE (Locking clip):

 For converting lap-sash seat belt to lap belt, and to 

obtain a better fit to the car where the fitted lock-off may not be suitable. Most cars will not 

need this, Re-order no: 0215.

Note: Marking on 
the top of a Grade 5 
Bolt.

Front of Vehicle

Centre line of 
seating position

Fig.3.

200mm 
min.

ALTERNATIVE INSTALLATION IF SEATBELT LOOSENS

LAP-SASH SEAT BELT

If a seat belt will not stay tight, then a 
Gated 3-Bar Slide may be used to prevent 
loosening.
There may be two types of Gated Slides 
available, Curved and Flat.
Before installing the restraint, join the 
lap-sash seat belt by using the Gated 3-Bar 
Slide stored under the carrier.

Hollow side

Inner
strap.

A.

 Hold the lap and sash straps together and fold as shown. 

Slide the inner strap into the Gated 3-Bar Slide followed by the 
outer strap.

B.

 The two straps should slide freely in the Gated 3-Bar Slide slot.

Faces 
towards
restraint.

C.

 Repeat previous step A for the other 

slot in the Gated 3-Bar Slide.

Ensure the Lap portion of seat 
belt is nearest to the restraint.

Curved

Flat

INSTALLATION OF CAR ANCHOR FITTING

Содержание BABY SAFETY CAPSULE


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды