2
BABY-SAFE Belted Base
The
BABY-SAFE
Belted Base
has been tested and certified in combination with the
BABY-SAFE plus
(with shock bars),
BABY-SAFE plus II
,
BABY-SAFE plus SHR
and the
BABY-SAFE plus SHR II
.
These infant carriers are marked with the ISOFIX symbol.
"Semi-universal"
With the vehicles 3-point
belt and support leg
This means: The child safety seat is
approved for rearward-facing installation
using the
BABY-SAFE
Belted Base
(fastening with the 3-point belt
1)
and
support leg) only in those vehicles cited on
the vehicle type list below.
This list is constantly updated. The latest
version can be obtained from us or from
our website: www.britax.eu /
www.roemer.eu
• Seats in other vehicles may also be
suitable for this child restraint system.
• If in doubt, please refer to the
manufacturer or the vendor of the child
restraint system.
• Please always observe the instructions
in your vehicle manual for the use of
child seats, especially in connection with
airbags.
1)
The safety belt must be approved to ECE R 16 or a
comparable standard (see test label on belt with an "E" or "e"
in a circle).
DO NOT use on a passenger
seat with a front airbag!
= Airbag off! Please observe
the instructions on the use of child
safety seats described in your
owners manual.
Never support the support leg
of the adapter against a
storage compartment in the
vehicle floor.
T
= okay with storage
compartment! You may only use
the adapter on the seats with
storage compartment which have
been checked and approved by
us.
2)
Approval only with an additional filler piece in the storage
compartment (available as a Volkswagen accessory, part
number 000.019.720 Touran/Caddy, 7N0.019.720 Sharan)
Airbag
off!
T
okay with storage compartment!
No. of doors
No. of seats
*
Starting from the year of manufacture
NP
Approved seats
Saloon
Estate
Convertible
Hatchback
MPV
Coupe
