3
Important Safety Information
•
Please read these instructions thoroughly and retain for future use.
•
All products manufactured and supplied by Bristan are safe provided they are
installed, used correctly and receive regular maintenance in accordance with these
instructions.
•
If you are in any doubt about your ability to install this product safely you must
employ the services of an experienced qualified plumber.
•
This product needs to be installed in accordance with, and meet the requirements of
the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
•
Remove all packaging and check the fitting for damage before starting installation.
•
Warning:
Before starting any installation please consider the following: before
drilling into walls, check that there are no hidden electrical wires, cables or water
supply pipes. This can be checked with the aid of an electronic detector.
•
If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
•
Important:
Remember to turn off the mains water supply before connecting to any
existing pipe work. Fitting isolating valves to the inlet feeds is recommended for ease
of maintenance.
•
Warning:
Before installing this product it is essential that you thoroughly flush
through the pipework in order to remove any remaining swarf, solder, etc.
Failure to carry out this procedure could cause problems or damage to the workings of
the tap.
•
Take care when handling the ‘flexible connecting pipes’, do not bend, twist or crush
them. Only tighten the pipes by hand.
•
Do not crush or kink the shower hose, this could damage the hose and cause leaks.
•
This product must not be modified in any way as this will invalidate the guarantee.
Need help?
Give us a call on 0844 701 6273 and speak to one of our trained advisers.
www.divapor.com