WATER PRESSURE
These fittings are suitable for use at all supply pressures. However for optimum use
both the hot and cold supplies should be reasonably balanced.
If the fitting is installed at low pressure (tank fed), then the minimum distance from the
outlet to the underside of the cold tank should be a least 2.0 metres to ensure adequate
performance.
This mixer should be installed in compliance with the Water Regulations. Where the
supplies are unbalanced, i.e. hot water from cylinder tank / cold from the mains,
approved check valves must be fitted in the supply pipes.
For further details contact your Local Water Authority.
1
6
Before starting any installation project please consider:
Prior to drilling into walls, check there are no hidden electrical
wires, cables or water supply pipes with the aid of an electronic
detector. If you use power tools do not forget:
- Wear eye protection
- Unplug equipment after use
SAFETY
NOTE
Operating Pressures: Min 0.2 bar, Max 7.0 bar.
Bristan Guarantee
2 year - Pumps, Power showers
2year parts. 1 year labour (subject to registration).
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour (subject to registration).
5 year - Taps and Mixers
5 year parts. 5 year labour (subject to proof of purchase).
Shower Valves
5 year parts. 5 year labour (subject to proof of purchase), else 1 year
proof of purchase.
Accessories
5 year parts only. Includes bathroom accessories, shower accessories
(e.g hoses, handsets and poles), wastes, WC levers and light pulls.
This guarantee applies to products purchased within the United Kingdom or
Republic of Ireland, but does not apply to products used commercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation must allow ready access to all products for the purpose of
inspection, maintenance or replacement.
Any part found to be defective during the above guarantee period will be replaced
without charge, providing that the product has been installed in accordance with
the instructions, used as intended, and regularly serviced.
Servicing should be carried out a regular intervals of no more than 12 months and
more frequently in hard water areas (heavy lime scale) areas.
In the unlikely event that any problem are encountered with the product’s
performance on installation, you must obtain guidance/authoristation from our
Customer Service Department, and able to supply proof and date of purchase,
before any remedial action is taken.
The guarantee excludes general wear and tear and damage caused by accident,
misuse or neglect, and does not cover the following:
∙
Components that are subject to general wear and tear such as filters,
seals, ‘O’ rings and washers etc.
∙
Damage caused by faulty installation.
∙
Damage caused by lime scale or any waterborne debris.
∙
Damage caused by inappropriate cleaning products (see user
instructions).
∙
Damage caused by the use of non-Bristan parts.
∙
The product being used for a purpose other than intended by the
manufacturer.
In the interest of continuous product improvement Bristan reserves the right to alter
specification as necessary.
CONTENTS
Description
Page Number
Water Pressure & Safety Note
1
Basin & Bath Taps
2
Basin Mixers
3
Bath Filler
4
Bath Shower Mixer
5
Guarantee
6
Aftercare
Back Page