Bath Shower Mixer and Bath Filler
Bath Shower Mixer and Bath Filler
Bath Shower Mixer and Bath Filler
Bath Shower Mixer and Bath Filler
1.
Identify all components and check for completeness, particularly before commencing installation.
2.
Install the mixer body to the bath using the backnuts (8) and backnut washers (7) provided under the bath
with the plinth (6) and further washers (7) above.
3.
FOR THE BATH SHOWER MIXER ONLY: Fit the hose (14) to the mixer, underneath the spout to diverter
(10&12).
4.
Fix the wall bracket (15) to the wall ensuring that the handset and hose will reach it.
5.
Connect the hot and cold water supplies and turn water supplies on.
6.
Fully open the valves (4) by turning handles (3), letting the water run for a few minutes to check for leaks.
7.
Operate the mixer in both bath and shower mode. To switch from bath to shower mode, pull the diverter knob
(9) up. After use, the mixer automatically reverts to the bath filling mode.
BATH SHOWER MIXER
BATH FILLER
8
6
5
16
10
9
3
7
2
1
4
15
14
13
12
11
1.
Cap x2 9.Diverter Knob x1
2.
Grub Screw x2 10. Diverter Valve x1
3.
Handle x2 11. Washer x1
4.
Valve x2 12. Hose Outlet x1
5.
Body x1 13. Flow Straightener x1
6.
Plinth x2 14. Hose x1
7.
Washer x4 15. Bracket x1
8.
Backnut x2 16. Handset x1
1
7
6
5
4
3
2
8
1. Cap
x2
2. Grub Screw
x2
3. Handle
x2
4. Valve
x2
5. Body
x1
6. Washers
x4
7. Backnut
x2
8. Flow Straightener
x1