Adjusting the Temperature
The mixer tap has been factory set
with equal (balanced) hot and cold
water supply pressures with the hot
water supply at 65˚C.
If your operating conditions are
different from those above, the outlet
water temperature may differ from
the factory setting.
If required the mixer tap can be
re-calibrated to suit your own
temperature requirements.
Turn the temperature control anti-
clockwise (hotter) fully until it stops
and check the temperature of the
water with a thermometer.
If the temperature is not correct,
re-calibrate the mixer tap:
1. Turn the flow of water on.
2. Remove the temperature control
lever. Remove the cap, undo the grub
screw and carefully remove the lever
handle.
3. Insert a 2.5mm hexagonal key
into the temperature control screw,
located at the centre of the cartridge
spindle.
Turn clockwise to decrease the
temperature and anti-clockwise to
increase the temperature.
Check the temperature and adjust
until you achieve the required
temperature.
4. Replace the handle ensuring it is in
the same position as when removed.
5. To finish, tighten the grub screw
and push-fit the cover cap into
position.
Hotter
Cooler
Need help?
Give us a call on
0330 026 6273
and speak to one of our trained advisors.
Maintenance
16
