Installation Instructions
& User Guide
Please leave these instructions
with the end user
Product Code: GLL FLEXSNK C (D1)
1.0
5.0
Pressure
BAR
0.2
4.0
2.0 3.0
Specifications
Maximum Static Pressure:
10.0 bar
Inlet Water Temperature
Inlet Connections
Min:
2.0 bar
Max:
5.0 bar
Dynamic Water Pressure
5°C
25°C
Cold Water Supply
Min:
5°C
Max:
25°C
65°C
Recommended
Servicing Your Tap
We recommend servicing your tap at
least once every year to prolong its life.
To see a video showing how to remove
the cartridge for servicing, scan the QR
code with your smart phone or tablet.
1/2” BSP
Flexible
Tails
Tools You’ll Need
Alternatively visit www.bristan.com/howto
Prior to Installation
Hot Water Supply
Pack Contents
65°C
Pressure
BAR
1.0
5.0
0.2
4.0
2.0
3.0
All products manufactured and supplied by Bristan are safe provided
they are installed, used correctly and recieve regular maintenance in
accordance with these instructions.
This product has been tested to the Water Regulations Advisory
Scheme (WRAS) and satisfies the requirements of the Water Supply
(Water Fittings) Regulations 1999 and current bylaws.
For full Installation Requirements & Notes (IRN) please visit
wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure ease
of future maintenance.
Before installing these taps the water supply must be thoroughly
flushed in order to remove any swarf, solder etc.
This product must not be modified in any way as this will invalidate the
guarantee.
Feed the pipes
through the sink
hole and place
the tap body.
1
Put the plinth over
the top of the sink
hole, ensuring the
O-Ring, is underneath
Push the washers
against the tap body
and tighten with the
fixing nut.
2
Olive
Connect the
hot and cold
water connections.
Compression
Nut
Flexible Connecting Pipes
Spare Parts
5
Flexible
Spout
Spray
Handset
Continuous Flow
Press for
Spray
To replace any spare parts
for your tap, why not
scan the QR Code or
visit www.bristan.com
and search for your product.
4
x1
Adjustable Spanner
Pipe Cutter
x1
x1
Installation
Hexagonal Key
3
Slight
bend
90°
angle
Kinks
Curved
round
Twists
Spout Features
Cold
Off
Hot
On
Operation
Switch on the water
supply and check
connections for any leaks.
Your tap is now ready to
use.
IMPORTANT
fit isolation
valves for
future
maintenance
REMEMBER
hot on the
left, cold on
the right
Marked red
for hot
