Specification
Specification
Specification
Specification
Min.
Max.
Operating pressure range (bar)
0.2
8.0
Maximum Static pressure – 10.0 bar
NOTE:- Nominally equal (balanced) inlet supply
pressures are recommended for optimum
performance.
Introduction
Introduction
Introduction
Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with
your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need and, if you need any further help, please
do not hesitate to give us a call on 0844 701 6273.
Safety Note
Safety Note
Safety Note
Safety Note
Please read these instruction thoroughly and retain for future use.
All product manufactured and supplied by Bristan are safe provided they are installed correctly, used correctly and
receive regular maintenance in accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water Supply (Water
Fittings) Regulations 1999 and Scottish Byelaws 2004.
Installation
Installation
Installation
Installation
1.
Identify all components and check for completeness,
particularly before commencing installation.
2.
Fit the mixer to the sink using the ‘C’ plate fixing kit. The
Full rubber washer goes between the fitting and the sink,
and the ‘C’ shaped rubber and metal washers on the
underside of the sink.
3.
Fit the tail pipes to the fitting and connect the hot and
cold water supplies.
4.
Fully open both valves, letting the water run for a few
minutes to flush the system.
5.
Check all joints and connections for leaks.
