Gas Cylinder Warmer (GCW & HCW Series)
BriskHeat
®
Corporation. All rights reserved.
Gas Cylinder Warmer (GCW & HCW Series)
BriskHeat
®
Corporation. All rights reserved.
OPERATION INSTRUCTIONS
Read and understand this entire
manual before operating this gas
cylinder warmer.
VOLTAGE:
120VAC; 240VAC
5
STEP 1
Remove heater from box. Make visual
inspection of heater. Do not use if
torn or damaged.
STEP 2
Gas cylinder should be placed on
a clean, dry surface.
2A.)
Open
VELCRO
®
closure on heater and
position around cylinder with the
power lead exit on the bottom of
the heater.
2B.)
Heater should be
positioned on cylinder such that it is
covering the cylinder from the
fl
oor
to the top of the cylinder.
2C.)
Attach
VELCRO
®
closure so heater is tight
against the cylinder with no sagging
or bundling. Cover any valves on top
of cylinder with optional insulating
blanket. (sold separately)
STEP 3
(see page 3 for electrical
compliance)
Terminate power cord to appropriate
electrical power supply. The power
cord consists of three color-coded
conductors, black, white, and non-
insulated. The black wire should be
connected to incoming hot line. The
white wire should be connected
to the neutral (for 120V) or power
return (for 240V). The non-insulated
wire should be connected to earth
ground. The power connections must
be adequately rated to electrically
support the voltage and amperage
of the heater. Follow all local
electrical codes for proper electrical
connections.
2A.)
2B.)
2C.)
SPECIFICATIONS
4
Operating conditions:
Operating Ambient Temperature Range:
30
o
F-95
o
F (-1
o
C – 35
o
C)
Temperature Range maintained on Bottom of Cylinder:
90
o
F-130
o
F (32
o
C – 54
o
C)
Temperature Range maintained on Top of Cylinder:
80
o
F-120
o
F (27
o
C – 49
o
C)
Self-Regulating Grounded Heating Element
120 or 240 Volts Models
Up to 150 Watts
Water Resistance
Oil and Some Chemical Resistance
Both Indoor and Outdoor Use
GCW Series: Ordinary Locations
HCW Series: CSA Class I Division I Groups C & D
2"
(51mm)
1/2"
(13mm) ON
TOP
»
3
1/2"
(88mm)
Part Drawing
