Brisa PACTRIO, Инструкция по эксплуатации, Страница: 7 / 12

5
6） Oscillation (Vertical) ，It controls the angle of horizontal louvers. The louvers opens to
135 degree when turn on the appliance. Press oscillation key to swing between 70 to 135.
Press again to freeze at any angle between 70 to 135. When the appliance is shut off, the
horizontal louvers are at 0 degree.
(6) Press this key to open and close the horizontal louver. The initial angle is 135°, use the
wind key to select the any angle from 60° to 135°,press it again you will get that angle.
Repeat again it will change freely. The louver will shut down when appliance off.
(7） Press this button, the Cool/Humidifier function is on with Beeps, the corresponding LED
is on. Press the button again to turn the function off.
Keep water level higher than min. level or it may damage the water pump when use
Cooler/Humidifier, and cause noise.
Under Cool/Humidifier, water pump will work 50s. If the water level less than Min. level, the
appliance will stop Cool/Humidifier automatically, meanwhile it beeps to alert.
Heating Button : Press this button to switch the function between cooling and heating
function. Under Cooling function, press to enter low-heating, press again to enter
high-heating. To exit heating function, press the button again.
NOTICE：
1.
The appliance will stop after 100 hours’ working. The filter cleanness indicator
LED will turn on. Press Cooler/Humidifier button for 5s to reset the filter cleanness
function. The appliance is back to normal status.
2、The indicator light will dim down for 1 min without any operation. Touch any
key the indicator will light up again.
l
Add water
Do add water before use Cool/Humidifier function. Turn the water tank knob
anticlockwise 90 degree and pull out to add water.