BitPipe™Cellular Dev
-Kit
User Guide
Copyright 2017 Briowireless Inc.
13
7.1.4
Connecting using the BitPipe
™
Cellular Test Tool
The following section provides the steps to connect to the modem and establish a mobile connection
with the modem.
Make sure to have followed the setup and installation steps in section 5 before proceeding.
1.
Launch the “BP
-C-
TestTool.exe” application (
Refer to section 7.1.1 if it has not been installed
yet). Figure 9 contains a screenshot of the application when it is first open.
Figure 9: BitPipe
™
Cellular Test Tool
2.
Select the “BitPipe” menu and
cl
ick on “Connect to BitPipe…”
3.
In the window that popped up, select the correct serial port to communicate in the pop-up
window. The default baudrate for the BitPipe
™
is 115200 bps.