6
3�
Install the Filters
Twist each filter (12 and 13) clockwise into the filter housings
located inside the dispenser cabinet. The sediment filter (12)
goes on the left, and the carbon filter (13) goes on the right.
12
13
4�
Connect a Water Bottle
IMPORTANT:
To prevent dry heating, do NOT turn the red hot-water and green cold-water switches on the
back of the unit to the On position until you complete the steps in this procedure.
A�
Clean the top of your own 5-gallon water bottle (purchased
separately) with a clean cloth and fill with tap water. Use the
funnel (20), if necessary.
20
B�
Open the water bottle cabinet door and feed the bottle adapter
tube (11) into the water bottle. Ensure the bottle adapter tube hits
the bottom of the water bottle.
C�
Fasten the bottle adapter (9) over the neck of the water bottle and
press securely into place.
9
9
11
