BRIO CLBL520SC, Инструкция по эксплуатации

Страница: 9 / 12

9
CLEANING AND MAINTENANCE
Use the Self-Cleaning Ozone Feature
It is highly recommended that you use the self-cleaning feature on a weekly basis to sanitize tanks
and water lines .
To activate the self-cleaning cycle, press in the
self-cleaning switch (14), hold for 5 seconds, and
release .
The power indicator light on the front of the
dispenser will begin blinking, indicating the
cleaning process is underway .
During the cleaning cycle, ozone is produced and injected into the water system . This ozone kills
bacteria and biofilms typically found in water dispensers. By the time the cleaning cycle ends, the
ozone is converted to harmless oxygen and emitted into the air .
IMPORTANT: The cycle takes 90 minutes to complete . During this time do not dispense and
drink the water . Doing so may result in an odd taste . For your convenience, we
recommend that you do this during a period when the dispenser is not in use,
such as overnight hours or when staff is away from the office. During the cycle
you may smell a faint trace of ozone .
Care and Maintenance
• Keep this dispenser in a dry and cool place and avoid direct sunshine .
• Ensure the back of the dispenser is at least 20 cm (8 in .) away from the wall .
• Never put the dispenser on paper or foam, which may store water and then cause creepage .
Never put anything flammable beside this machine.
• Do not use the dispenser outdoors or in a place that can be splashed by water .
• If the dispenser is not in use for longer than a 24-hour period, turn off the heating switch or the
refrigerating switch to save power and drain any remaining water .
• Clean your cabinet, controls, bottle probe and spout each time you change your water bottle .
Use a clean soft cloth and a food grade sanitizer or bleach .
• Empty and clean the drip tray, grid and float as needed.
14
1 2 3 4
Self Clean