7
2�
Install the Faucet
IMPORTANT:
If your sink does not have a second faucet hole, please contact a licensed professional to
create one. Do NOT attempt to drill a faucet hole yourself as this may damage the sink.
A�
Slide the steel plate (1) and the
washer (2) up the faucet stem
as illustrated. Then insert the
faucet stem into the hole in
the counter, positioning the
faucet body (E) on top of the
counter.
B�
From underneath the sink,
slide the plastic washer (3)
up the faucet stem, followed
by the steel washer (4). Twist
the lock nut (5) up the stem,
securing the faucet (E) and all
the washers in place.
C�
From underneath the sink,
slide the quick connector (6)
up the faucet stem and secure
in place using the clips (7).
IMPORTANT:
Connect the white faucet tube (C) to the quick connector (6).
3�
Make the Connections
A�
Connect the two tubes to the engine (A).
Operation
Startup and Flushing of Water
Flush the filter in the engine (A) upon first use and each time you change the filter.
6
7
E
C
4
C
A
Ca
