The Ypush is designed to be quickly and easily unpacked
and assembled. The Travel Roller Bag supplied is the best
way to keep the Ypush protected. The following steps
will guide you through the set-up process. Please refer to
images on page 23.
1
Put the Travel Roller Bag in an open, level area.
39
2
Unclip any pull handles from the front of the bag that
might be in the way, and fully unzip the large flap.
40
3
Hold the flap and start lifting it forward
41
until it sits
on the floor.
4
With the flap on the ground, roll the Ypush out of
the bag.
42
5
Pivot both the footrests down as shown by the green
arrow
43
Ensure that the brackets lock firmly onto the
square chassis tubes.
6
Release the pack-up clip attached to the inner chassis
tube, by pulling upwards as shown by the green arrow.
44
7
Push down and outwards on the seat sides as shown
45
to start opening up the wheelchair. As the seat area
widens use the palms of your hands to apply downward
force to "click" the seat in place.
46
8
Pivot both footrests into place as shown.
47
9
Raise both handles together
48
until they both "click"
into the locked position. Pull backwards on the handles
to check that they are both locked securely, and in the
correct position.
10
Lift the right hand armrest and fit the Battery
49
and
connect ready for use as shown on page 18.
11
Fold right armrest back down, check through all the
above details to ensure everything is set up correctly.
Ensure brakes are ON with the brake levers "UP" as
shown,
50
then fully inspect Ypush before use.
12
Read this manual thoroughly, understand all the
functions and features, and undertake all the safety
checks before use.
Setting up the Ypush
Unpacking and assembly – see images page 23
Brintal Ypush
Owner’s Manual and Service Record
22
Warning!
Assembling the Ypush involves
some lifting and handling. Before lifting, check the
Technical Specifications section of this manual for the
various weights to avoid injury.
Warning!
Pinching or Crushing. Be careful to
avoid being pinched or having your hands crushed
when setting up the Ypush.
